X
Hotline8-800-700-21-21

Cultivators of KD series

Description

 

Cultivators of KD series are intended for the following soil treatment: pre-sowing, autumn and fallow tillage, crushing residues of high-stem crops, cutting layers, chiseling.

The cultivators are used in all agro-climatic zones, including those ones prone to wind and water erosion, on all soil types, except for stony ones. The use of cultivators is effective for autumn and pre-sowing treatment in the system of minimum tillage.

The use of the cultivators provides:

  1. field leveling;
  2. seedbed leveling;
  3. mechanical weeding;
  4. crushing of crop residues;
  5. creation of a mulch layer;
  6. destruction of the lower compacted soil layers. 

The cultivators are aggregated with tractors of the drawbar category of 3-6 p.f., with a pressure in the hydraulic system up to 23 MPa.

Sound PRO! arguments for the cultivators of KD series:

  •  When using the cultivator for pre-sowing tillage:
  1. The discs grind and mix crop residues with the soil, crumbling the topsoil;
  2. The flat hoes cut the weeds and loosen the soil, creating an even dense seedbed; 
  3. The harrows level the field surface, distribute the crop residues evenly and destruct weeds; 
  4. The rollers ensure additional soil crumbling, create a mulch layer and level the field surface;
  • During the autumn treatment, depending on the working bodies installed, the cultivator carries out tillage at the following depth:
  1. with a flat hoe, cm..............................5-12;
  2. with an assemblable hoe, cm..............12 – 16;
  3. with an assemblable subsoiler, cm.....12 – 18.
  • The design of the cultivator frame and a set of adjustments allows this unit to operate, depending on the agrotechnical tasks and weather conditions assigned thereto, with and without various basic options, namely:

1. with high humidity or autumn soil slitting with a chisel, the cultivator can work without a harrow teeth unit and without rollers, or the rollers simply roll passively, while the cultivator itself rests on a group of support and transport wheels;
2. in the second variant, the cultivator can work with any working and basic options, relying on the front support wheels and rear press rollers, while the transport wheels are fully raised up with the help of hydraulic cylinders. This makes it possible to use the function of tooth harrows and press or comb-out rollers to the maximum;

  • The configuration of the hoe arrangement on this unit provides 100% cutting of weeds and, in case of agrotechnical needs, allows this unit to be used in work with the removed disc working bodies;
  • The basic configuration of the cultivator may include a tandem of both press and comb-out rollers or a mixed variant;
  • The design of the press and comb-out rollers in a tandem with the installation of agricultural bearings made in Serbia thereon, with a triple seal for operation of these bearings in an aggressive environment, significantly increases the resource of this unit in comparison with analogues of other manufacturers;
  • The basic configuration of the KD series cultivators includes a three-row tooth harrow module;
  • The frame structure adopts thick-walled profile pipes made of 09G2S steel, which is distinguished by excellent weldability and increased strength, which makes it possible to increase the load on the working bodies and to expand the technological capabilities of the cultivators;
  • The extended base of the cultivator increases the accuracy of the tillage depth and improves the quality of leveling the field surface;
  • The use of elastic dampers in the disc opener reduced the load on the frame structures, bearing assembly and disc. As a result of microvibration, the load on the disc opener and the traction resistance of the unit have decreased, while the quality of soil cultivation has increased. The soil cultivation with a disc opener increases the service life of the flat hoes twice as compared to the K series cultivators, and the general reduction in the load on the working bodies increases the service life of the units and the cultivator as a whole;
  • All units of the cultivator, except for bearings, hydraulic cylinders and tires, are manufactured at our plant, which greatly simplifies the warranty and post-warranty maintenance of the machinery
  • The cultivators of KD series regularly undergo state tests, where they confirm their high reliability, as well as the efficiency and stability of the technological process of soil tillage.

 

РАМА
    
  •  В конструкции рамы использованы толстостенные профильные трубы из стали 09Г2С, отличающейся прекрасной свариваемостью и повышенной прочностью, что позволило увеличить нагрузку на рабочие органы и расширить технологические возможности культиваторов;

  • Расширенная база культиватора повышает точность глубины обработки и повышает качество выравнивания поверхности поля;

  • Литая серьга из высокопрочной стали

  • Углы рамы проварены косынками для дополнительного усиления

     
     

 
  • Глубина обработки регулируется жестко фиксирующимися клипсами на гидроцилиндрах последовательного соединения с шагом 1см - гарантированное сохранение выставленных настроек;
РАБОЧИЕ ОРГАНЫ
    
  • ​Конфигурация расположения лап на данном агрегате обеспечивает стопроцентное подрезание сорняков, и при агротехнической необходимости позволяет использовать данный агрегат в работе со снятыми дисковыми рабочими органами;

  • Стойки плоскорежущих лап 56*12 мм изготовлены из стали 60С2А

  • Стойка оборудована предохранительным срезным бортом с изменяемым углом атаки, что предотвращает поломки агрегата

     
     

 
  • Лапа шириной захвата 460 мм из стали 65Г с нанесением на носок твердого сплава ВК8 и укрепленным ТВЧ кромками крыльев
     
     
 
  • В базовую комплектацию культиваторов серии КД входит модуль трёхрядной зубовой бороны;

     
     
 
  • Применение эластичных демпферов в дисковом сошнике снизило нагрузку на рамные конструкции, подшипниковый узел, диск. В результате микровибрации снизилась нагрузка на дисковый сошник и снизилось тяговое сопротивление агрегата, а также повысилось качество обработки почвы. Обработка дисковым сошником почвы увеличивает срок службы плоскорежущих лап в два раза, по сравнению с культиваторами серии К, а общее снижение нагрузки на рабочие органы увеличивает срок службы узлов и культиватора в целом;

     
     
 
  • В базовой комплектации культиватора может устанавливаться тандем как прикатывающих, так и вычёсывающих катков или смешанный вариант;

  • Конструкция прикатывающих и вычёсывающих катков в тандеме с установкой на них подшипников сельскохозяйственного назначения производства Сербия, с тройным уплотнением для работы данных подшипников в агрессивной среде, значительно повышает ресурс данного узла в сравнении с аналогами других производителей;

     
     

 

 

 

  • Дополнительно устанавливаются:

- сборная лапа,

 

 

 

 

- сборный глубокорыхлитель 

 

 

 

 

 

- долото

 

 

  • Это позволяет использовать агрегат на большую глубину до 30см.

 

 

Specifications

Parameter name

KD-360 М

KD-570 М

KD-720 М

Operating width, m

3,6

5,7

7,2

Productivity per 1 hour of basic time (at the speed of 12 km/h) ha, not less than

3,6

5,7

7,2

Number of tines with a flat hoe, pcs.

9

15

19

Number of tines with discs (Ǿ560 mm), pcs.

7

13

17

Number of tines with discs (Ǿ520 mm), pcs.

2

Number of rows of spring teeth, pcs.

3

Number of rows of hoes, pcs.

2

Operating width of the cultivator tine, mm

460

Operating depth, cm*

with a flat hoe

5-12

with an assemblable hoe (without discs)

12-16

with an assemblable subsoiler (without discs)

12-18

Operating speed, km/h

10-12

Transport speed, km/h, not more than

20

Dimensions in the working position, mm:

length

7800

8100

8100

width

3700

5800

7300

height

1600

1600

1600

Dimensions in the transport position, mm:

length

8100

8100

8100

width

3680

5780

4250

height

1120

1120

3300

Weight, kg

2900

3900

4600

Service life, years

7

Number of operating staff, persons

1

Coupling

KD-360 М

KD-570 М

KD-720 М

Pre-sowing, fallows

HTZ-16131-03

(180 H.P.)

MTZ-2022.4

(212 H.P.)

HTZ-16131-03

(180 H.P.)

MTZ-2022.4

(212 H.P.)

K-701

(300 H.P.)

 MTZ-3022

(303 H.P.)

Autumn

HTZ-17221 (210 h.p.)

MTZ-2022,4 (212 h.p.)

HTZ-17221 (210 h.p.)

MTZ-2022,4 (212 h.p.)

K-701

(300 H.P.)

MTZ-3022

(303 H.P.)

Recommended drawbar category of tractors, p.f.

3-4

3-4

5-6

Download operating manual
Other models
Make a preliminary orderTerms of delivery
Organization name*
Region*
Contact person*
Phone*
Email
Technology name*
Shiping method
Have you previously purchased Featagro products?*

* - fields are required

By submitting this form, you acknowledge that you have read and agree with all clauses of the user agreement and consent to the processing of your personal data in accordance with Federal Law No. 152-FZ of July 27, 2006 “On Personal Data”, on the conditions and for the purposes identified by this Privacy Policy.

Send order